There are endless possibilities for achieving the comfort and design of contemporary spaces. For a reason, dry construction has become synonymous with fast, safe and high-quality construction that breaks through the usual space adaptation deadlines. Partition walls, wall coverings, ceilings, floors, decorative elements are made using the dry construction method... Gypsum building material completely changes the usual forms, functions and elements of spatial planning. From expansion systems to substructure elements, the choice is unlimited.
In today's blog, we will introduce you KNAUF Diamant plate, its characteristics and purpose, and discover how a new standard in dry construction has been set.
With a dedicated approach, a demanding recipe and after a series of tests, it was created DIAMOND, system component for high-quality dry prefabricated construction. Diamant is a special hard gypsum board with a dense core made of special impregnated gypsum of high hardness. It is used to create construction assemblies with high requirements in the areas of:
- Fire protection
- Noise protection
- Resistance to moisture
- In anti-ballistic systems
- Increased impact resistance
- Burglary protection
Link to Diamant video:
Application:
- Higher wall heights due to high strength
- Increased load capacity with fasteners
- Robust surface
- Impregnated for reduced moisture absorption
- Good holding of the assembly under the influence of fire
- Core made of special plaster soft to bend for strong noise protection
- Simple processing
- Non-fuel
- Flexible (Knauf Diamant 12,5)
Execution:
Knauf Diamant panel DFH2IR is suitable for the following systems:
- Ceiling coverings and suspended ceilings
- Ceiling coverings
- Walls with metal substructure
- Walls with wooden substructure (non-load-bearing)
- Walls with wooden frames and wooden panels (bearing)
- The walls of the manhole
- Knauf Cubo "room-in-room" systems
Installation of the KNAUF Diamant panel
Due to the characteristics of special strength and density Diamond plates it is necessary to use KNAUF DIAMOND SCREW. Special screw with a trumpet head, special geometry with a thread for hard plasterboards (for easy and quick screwing into hard plasterboards).
Comes in 4 sizes:
- XTN 3,9 x 23 mm
- XTN 3,9 x 33 mm
- XTN 3,9 x 38 mm
- XTN 3,9 x 55 mm
System for high-quality dry prefabricated construction
W11. Diamond walls
Knauf doo contributed to the development of dry construction based on gypsum boards, as well as systems whose solutions are highly efficient. Listening to the needs of the market, modern construction and users, Knauf doo once again combined all requirements in one place and offered a multifunctional solution for the needs of modern man.
Knauf system W11. Diamant walls is a gypsum wall system on a metal substructure with two- to three-layer plaster cladding, single substructure.
Area of application in areas where it is necessary:
- Fire protection
- Noise protection
- Moisture resistance
- Puncture protection
- Increased impact resistance
- Burglary protection
KNAUF Diamant panels are available in the Termodinamika sales centers in Zagreb and Split, and our team dry construction department is at your disposal for all questions and advice.
Follow us on social networks as well Instagram, Facebook i LinkedIn and log in to our weekly newsletter in order to download a free brochure on ceramic installation systems and always be up to date with all the trends, tips and products in our offer.
