fbpx
To the perfect wall with Maxima products

To the perfect wall with Maxima products

You must have wanted to refresh your home at least once and give the space a new dimension, but you didn't know where to start and how to make a change quickly and easily, without having to buy new furniture or completely redecorate your home. Maxima, a brand of paints and varnishes, offers interior wall treatment products in its assortment that will completely change your wall and make your space more beautiful. To get to know you better MAXIDECOR decorative colors Sahara i Velvet, below we bring you all the color characteristics from MAXIDECOR ASSORTMENT, their purpose and how to use them.

MAXIDECOR Sahara

MAXIDECOR Sahara is an effective color of exceptional quality, made on the basis of an aqueous dispersion of acrylic binder, fillers, special additives and effective pigments. MAXIDECOR Sahara is a water-washable coating with good vapor permeability, is not harmful to humans and the environment and is easy to apply. It is intended for the protection and decoration of interior wall surfaces, where it is necessary to achieve an exciting and dynamic effect. It can be tinted on the MAXIMIX system according to the MAXIDECOR Sahara tone chart.

How to use?

The surface must be: dry, load-bearing, clean and free of loosely attached parts, dust, water-soluble salts, grease and other impurities. Remove old paint that is not well bonded, mechanically. Uneven surfaces must be leveled with an acrylic smoothing compound GLETOLIN G. Then apply to the surface ULTRADIS tinted in the approximate shade of the finishing material, all according to the manufacturer's instructions. After drying ULTRADIS, apply MAXIDECOR Sahara, which is delivered ready for use, it just needs to be mixed by hand until homogenized. MAXIDECOR Sahara tinted on the MAXIMIX system and MAXIDECOR Sahara of different batches and production dates must be homogenized!

Application technique 1

MAXIDECOR Sahara in smaller quantities gradually apply in one layer, with brush movements in all directions, on an area of ​​1-2m². Under optimal conditions, 5 to 10 minutes after application, go over the applied material again with a dry brush, freely "playing" with the sandy part, in order to create the final look and remove possible brush marks. 

Application technique 2

Apply the material in smaller quantities gradually in one layer, with oblique, vertical or horizontal brush movements, on an area of ​​1-2m². Under optimal conditions, 5 to 10 minutes after application, go over the applied material again with a dry brush, in opposite movements to the previous ones, in order to achieve the final look.

MAXIDECOR Velvet

MAXIDECOR Velvet is an effective paint of exceptional quality, made on the basis of an aqueous dispersion of acrylic binder, fillers, special additives and effective pigments. MAXIDECOR Velvet is a water-washable coating, with good vapor permeability, not harmful to humans and the environment. It is easy to apply and is intended for the protection and decoration of interior wall surfaces, where it is necessary to create a subtle effect, as sophisticated as silk. Can be toned to MAXIMIX system according to the MAXIDECOR Velvet tone chart.

How to use?

The surface must be: dry, load-bearing, clean and free of loosely bonded parts, dust, water-soluble salts, grease and other impurities. Remove old paint that is not well bonded, mechanically. Flatten uneven surfaces with acrylic smoothing compound GLETOLIN G. Then, apply a base coat to the surface MAXIDECOR Smooth Primer tinted to the approximate shade of the final material, all according to the manufacturer's instructions. After drying the base coat, apply MAXIDECOR Velvet, which is delivered ready for use, it just needs to be mixed by hand until completely homogenized. MAXIDECOR Velvet tinted on the MAXIMIX system and MAXIDECOR Velvet of different batches and production dates must be homogenized.

The material should first be applied with a brush in one layer, with cross movements, in order to prepare the coating for further processing. While the applied material is still fresh, use a stainless steel or plastic trowel with rounded edges to create the appropriate effect by creating a sense of "depth". The trowel must be at an angle of approximately 30 degrees to the surface using light pressure. In case you don't want to use a trowel, the appropriate effect can be created just by using a brush, by gradually applying the material in smaller amounts in one layer, with cross or semicircular movements of the brush. After use, wash the tool immediately with water.

Now, when you have decided to bring a touch of freshness to your home and arrange your wall with MAXIDECOR decorative colors, all you have to do is head to the sales centers Thermodynamics in Split or Zagreb.

Sve Maxima you can find the products in our sales centers in Zagreb and Split, and you can also visit us contact for all questions and advice.

Follow us on social networks as well Instagram, Facebook i LinkedIn and log in to our weekly newsletter so that you are always up to date with all the trends, tips and products for building and decorating the home.